We are competitive with our pricing! sales@guitareffectspedals.com Toll Free 1-800-455-1030 (U.S.) 1-973-366-4554 (International) No sales tax outside of New Jersey. International shipping costs are not included.

$35.00 in stock

Includes: <<< One 5-connector daisy chain cable and the following eight assorted color coded adaptor cables to power a wide variety of effects: <<< Two Reverse Polarity Jumper Cables.  Tip positive / barrel negative, for use with older Dunlop, and some Fulltone effects. <<< Two 1/8" Phone Plug Jumper Cables.  Tip positive / sleeve negative, for use with Jacques, older DOD, Pro Co Rat, and some Electro-Harmonix effects. <<< One Reverse Polarity Jumper Cable with larger male barrel plug for use with Line 6 Modelers. <<< Two Battery Plug Jumper Cables.  Connects to unit's battery clip, for use with older effects and new boutique units without DC jacks (older Ibanez, older MXR, Z-Vex). <<< One Standard Polarity Extension Cable for oversized effects.

The Godlyke PA-9 Power-All provides the simplest, most effective, most affordable method for powering your 9-volt effect units. The PA-9's advanced circuitry steps down high line voltages to 9-volts and automatically supplies the required amount of current. The PA-9's whopping 1.7 Amp current capability allows it to power a virtually unlimited number of 9-volt effects, including Line 6 modeling stompboxes. Other features of the PA-9 include: 9-volt, 1.7 Amp supply - Can power over twenty 9-volt effect pedals or similar devices (actual # of units depends on current draw of individual pedals used). Can replace any 9-volt DC power supply including the Boss PSA-120, Boss ACA-120, DOD PS-200R, Morley 9V, Danelectro DA-1, Dunlop ECB-03, Ibanez AC-109, Guyatone AC-2, Maxon AC210N, etc. No transformer, thus no heat dissipation or noise (60 cycle hum) Takes up only one outlet socket space (unlike typical wall wart adaptors) Can run off any Mains supply (100-240v), thus no need for power transformers when travelling abroad. Has all necessary national safety certifications - UL, CUL, etc. (see unit for listing).

$25.00 in stock		Godlyke Power-All Basic Kit Includes the Power-All power supply and: • Cable-5/R five-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo! • (1) Cable-Blue 3.5 mm Phone Plug Jumper Cable for EH and other vintage pedals • (1) Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack • (1) Cable-Grey Battery Clip Jumper Cables for pedals with no AC input • (1) Cable-Red/R right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals • (3) Cable Cap insulator sheaths to cover power leads when not in use
Godlyke PA-9E Euro Power-All 9-volt Power Supply
$45.00 out of stock $13 shipping to UK, France, Italy, Spain, Germany	Godlyke PA-9E Euro Power-All 9-volt Power Supply The simplest, most effective, most affordable method for powering your 9-volt effect units, the PA-9E offers all the great features of our PA-9 Power-All, but with two-prong Euro-Style connector and CE approval for use on the European continent.  Advanced circuitry steps down high line voltages to 9-volts DC and automatically supplies the required amount of current.  1.7 Amp current capability can power over twenty 9-volt effects.  The PA-9 Power-all System includes One x Cable-5 daisy chain connector, Two x 1/8" phone plug jumper cables (Blue), Two x barrel-type reverse polarity jumper cables (Red), Two x battery clip jumper cables (grey), One x Line 6 Modeler Cable (Green) and One x barrel-type extension jumper cable (Black) for over-sized effect units.

Godlyke PA-9UK Power-All UK 9-volt Power Supply
$45.00 in stock $13 shipping to UK		Godlyke PA-9UK Power-All 9-volt UK Power Supply The simplest, most effective, most affordable method for powering your 9-volt effect units, the PA-9UK offers all the great features of our PA-9 Power-All, but with three-prong UK-Style connector and CE approval for use in the United Kingdom and Hong Kong.  Advanced circuitry steps down high line voltages to 9-volts DC and automatically supplies the required amount of current.  1.7 Amp current capability can power over twenty 9-volt effects.  The PA-9UK Power-all System includes One x Cable-5 daisy chain connector, Two x 1/8" phone plug jumper cables (Blue), Two x barrel-type reverse polarity jumper cables (Red), Two x battery clip jumper cables (grey), One x Line 6 Modeler Cable (Green) and One x barrel-type extension jumper cable (Black) for over-sized effect units.

Godlyke PA-9AU Australian Power-All 9-volt Power Supply

$45.00   in stock ($13 shipping to Australia)

Godlyke PA-9AU Australian Power-All 9-volt Power Supply The simplest, most effective, most affordable method for powering your 9-volt effect units, the PA-9AU offers all the great features of our PA-9 Power-All, but with two-prong Aussie-Style connector with C-Tick certification for use on the Australian continent and neighboring islands. Advanced circuitry steps down high line voltages to 9-volts DC and automatically supplies the required amount of current.  1.7 Amp current capability can power over twenty 9-volt effects. The PA-9 Power-all System includes the following: 1 x Cable-5 daisy chain connector 1 x Straight 1/8" phone plug jumper cable (Blue) 1 x Angle 1/8" phone plug jumper cable (Blue) 1 x Straight Barrel-style reverse polarity jumper cable (Red) 1 x Angle Barrel-style reverse polarity jumper cable (Red) 2 x Battery clip jumper cables (Grey) 1 x Straight 2.5 mm Barrel-style Line 6 Modeler Cable (Green) 1 x Angle 2.5 mm Barrel-style Line 6 Modeler Cable (Green) 1x Straight Barrel-style extension jumper cable (Black) 1 x Angle Barrel-style extension jumper cable (Black) 3 x Yellow insulator caps for unused power leads Lifetime Warranty

Godlyke Power Pump and adaptor cables
$20.00 out of stock	Godlyke PP-9 Power Pump Voltage Converter The Power Pump is an inline voltage step-up converter that accepts 9 volts DC and increases it to an output voltage of 12, 18, or 24 volts DC at specific current values (see chart below).  Output voltage is determined by position of the 3-way switch located on the unit’s chassis.  Input is standard polarity Tip positive/Barrel negative female barrel connector and Output is standard polarity Tip negative/Barrel positive male barrel connector. Specifications: In: 9 VDC @ 1700 mA (recommended) Out: 12 VDC (.65 A) - 18 VDC (.44A) - 24 VDC (.33 A) @ 5% Power Rating: 7.83 W continuous Polarity: Tip Negative/Barrel Positive Directions for Use: Attach the PP-9 directly to the PA-9 or to a lead on the Cable-5 Daisy Chain Set the PP-9 to the required voltage – It can only supply 1 voltage at a time.  Make sure you check the polarity and voltage of the unit to be powered before connecting it to the Power Pump.  Connect the PP-9 to the unit (s) to be powered - You can power multiple units off each PP-9 as long as you do not exceed the max Current per voltage listed above.   You can power up to 2 PP-9’s off one PA-9 Notes to User: The Power Pump is designed to work in conjunction with the Godlyke PA-9 Power-All 9-volt digital power supply ONLY.  Using it with other power supplies can damage them, the PP-9, and/or the unit (s) being powered.  Godlyke, Inc. assumes no responsibility for damage resulting from abuse of misuse of this product.  MAKE SURE TO CHECK THE VOLTAGE AND POLARITY BEFORE CONNECTING ANY UNIT TO THE PP-9!!!
$10.95 shipped in stock StraightRight Angled	$9.95 shipped for orders $25 and up StraightRight Angled		Godlyke Power-All Cable-5 daisy chain Additional daisy chain cable for Power-All PA-9, powers up to 5 additional units.  Daisy Chain connector with standard polarity tip negative/barrel positive jacks connects the PA-9 Power-All to five 9-volt effect pedals.  The CABLE-5 can also be used with Power-All adaptor cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.).  Link multiple CABLE-5 connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used). Jacks (5): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 22 mm Cable length: 42.5" (8.5" between jacks)
$5.95 shipped in stock	$5.60 shipped for orders $25 and up		Godlyke Power-All Y-Splitter Jumper Cable Y-splitter cable with 5.5 MM standard polarity tip negative/barrel positive male spring-loaded jacks.  The Cable-Y allows you to power two effect pedals off of one PA-9 or one lead of the Cable-5 Daisy Chain.  This allows for chaining of additional effects without the need for a second daisy-chain cable (actual number of units capable of being powered will depend on current draw of individual units used). JACKS (SPRING-LOADED X 2): 5.5 MM EXTERNAL DIAMETER, 2.1 MM INTERNAL DIAMETER, 10 MM BARREL LENGTH CABLE LENGTH: 155 MM (TO SPLIT), 268 MM TOTAL
$4.95 shipped in stock StraightRight Angled	$3.50 shipped for orders $25 and up StraightRight Angled		Godlyke Power-All Cable-Red Reverse Polarity Jumper Cable The Cable-Red allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative).  The Cable-Red can be hooked to any jack on the Cable-5 daisy chain or directly to the PA-9 itself.
$4.95 shipped in stock StraightRight Angled	$3.50 shipped for orders $25 and up StraightRight Angled		Godlyke Power-All Cable-Blue Phone Plug Jumper Cable The Cable-Blue allows users to power effect units that use a 1/8" phone plug connector with tip-positive polarity.  The Cable-Blue can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.  Note that to achieve tip-negative polarity from the Cable-Blue, simply attach a Cable-Red in between it and the power source.
$4.95 shipped in stock StraightRight Angled	$3.50 shipped for orders $25 and up StraightRight Angled		Godlyke Power-All Cable-Green Line-6 Jumper Cable The Cable-Green allows the user to power Line-6 Stomp-Box modelers from the PA-9.  The Cable-Green features a reverse-polarity barrel connector with a smaller internal diameter designed specifically for use w/Line-6 Modelers.  The Cable-Green can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself (note that the PA-9 can power up to three Line-6 Modelers while still having power remaining for other effect units).
$4.95 shipped in stock	$3.50 shipped for orders $25 and up		Godlyke Power-All Cable-Grey Battery Clip Jumper Cable The Cable-Red allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative).  The Cable-Red can be hooked to any jack on the Cable-5 daisy chain or directly to the PA-9 itself.
$4.95 shipped in stock StraightRight Angled	$3.50 shipped for orders $25 and up StraightRight Angled		Godlyke Power-All Cable-Black Extension Jumper Cable The Cable-Black allows users to power over-sized effect units or units w/AC jacks in hard-to-reach places.  The Cable-Black is 21 cm long from jack to jack and can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.