FREE UPS GROUND SHIPPING WITHIN THE U.S. 48!
IRONHEART - IRT120H
Forged deep in the Black Country, the Ironheart series continues the legacy begun decades before with Laney amps such as KLIPP and AOR.
Packed full of features, amazing tone and a thoroughly modern and aggressive look, the Ironheart models are extremely versatile modern amplifiers. Capable of masses of usable gain, these amplifiers are perfect for modern metal. Utilising 3 channels and built in pre boosts, they are also extremely versatile in any musical situation. Tones from crystal cleans to bluesy crunch, full on rock to molten modern lead sounds are available at the click of a switch.
The IRT120H is a thoroughly modern looking valve head capable of some full on metal tones but it also offers much more than many other metal orientated amps on the market.
Loaded with a quartet of premium hand selected TAD 6L6 loaded valves it generates 120 watts RMS of hot valve tone.
Its feature packed pre amp is laid out logically and features 3 distinct channels – Clean, Rhythm and Lead. Each channel features passive 3 band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amplifier and the drivers, depending on the volume you are playing at, an overall Tone control, a Laney custom designed Digital Reverb plus a really useful WATTS feature which allows you to dial the output of the amplifier right back to a whisper without destroying your tone. This is a great feature and really useful for recording in your home studio or playing late into the night.
One of the coolest features of the IRT120H happens right at the front end of the pre amp section. The IRT120H features a switchable PRE-BOOST facility which functions just like kicking in your favourite boost pedal in front of your amp. Which simple hits the first pre amp tube a little harder giving you more dynamics and feel to your playing.
AT THE BACK
The rear panel of the unit features everything you need to connect your outboard gear, an variable level FX loop, a variety of extension speaker socket and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory fitted 6L6 valves to EL34’s should you wish to.
Finished in a tough black basket weave Tolex with matching front fret and a brooding red glow the Ironheart range looks as good as it sounds!
Ironheart molten tone – Just Play It.
Boost Switch Footswitchable PRE BOOST
Channels 3 - Clean, Rhythm & Lead
Class Class AB
Packed Dimensions (HxWxD mm) W 678 x H 271 x D 288
Equalisation Bass, Middle & Treble with Pull-Push EQ shift on each
Footswitch FS4-IRT supplied as standard - switches Channel, Clean, Reverb & Pre Boost
FX Loop(s) Yes - variable level FX loop
Inputs 1 x Jack
Master Presence Control Overall TONE
Output Attenuation VARI WATTS feature
Output Valves 4 x 6L6
Power 120 Watts
Preamp Valves 4 x ECC83
Reverb Laney designed Digital reverb
Speaker connections 2 jack sockets - 4, 8 or 16 Ohms
Weight 20Kg Unit Weight (24kg) Shipping
Unit Dims - for int. case (HxWxD mm) 271 x 678 x 288