FREE STANDARD SHIPPING IN THE U.S.!
CUB - CUB-HEAD
The all new CUB HEAD finally gives players access to great British valve tone like never before.
The retro styled CUB HEAD features a top mounted control panel consisting of the following; gain, treble, middle, bass, volume, tone and reverb.
STRAIGHT AHEAD TONE
Dialling in a great valve tone is simple – select your input – 15 W or <1 W : more on these controls in a moment, dial in your tone, add a taste of high
quality reverb and away you go.
CLASS A TONE
The CUB HEAD houses 3 x ECC83's in its preamp and 2 x EL84's in the power amp section, all hand selected to give the best valve tone possible.
Lets go back for a moment and look at the inputs on the CUB HEAD. The CUB HEAD has two input options, one giving you 15W RMS of valve tone, the other
giving you a huge valve sound, but cutting the output down to .75 of a Watt. .75 of a Watt might not sound like much, but it allows you to drive the
output section really hard and generate some very pleasing power amp compression and pleasing break up giving you that holy grail of guitar tone!
The rear panel of the CUB HEAD houses two speaker out sockets in 8 & 16 Ohm options, a footswitch socket for switching the reverb and an effects loop consisting of a Send/Line out socket and a return socket.
The CUB HEAD can be paired with any Laney cabinet but is ideally suited to the CUB CAB.
Channel Controls Gain, Treble, Middle, Bass, Volume & Tone
Class Class A/B
Packed Dimensions (HxWxD mm) 271 x 475 x 275
Equalisation Bass, Middle, Treble
Footswitch FS1 (Not Included)
FX Loop(s) Yes
Inputs 2 : 15W & <1W
Output Valves 2 x EL84
Power 15 Watts & < 1 Watt
Preamp Valves 3 x ECC83
Speaker connections 8 - 16 Ohm connections
Weight 9 Kg
Unit Dims - for int. case (HxWxD mm) 248 x 435 x 235